Skip to main content
TE Connectivity AMP Connectors 281784-5

TE 281784-5 HE13/HE14 IDC Plug, 5 Pos, 0.100" Pitch, Gold

MPN 281784-5
Active

TE Connectivity HE13/HE14 series, 281784-5, IDC plug, 5 positions, 1 row, 0.100" (2.54mm) pitch, female socket contacts, gold plating 15.0µin, free hanging, 24-26 AWG, detent lock.

$1.1300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesHE13/HE14
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

281784-5 specifications
ParameterValue
SeriesHE13/HE14
Wire typeDiscrete
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typePlug
Fastening typeDetent Lock
Wire gauge24-26 AWG
Cable terminationIDC
ColorBlue
Pitch0.100\" (2.54mm)
PackageBulk
Contact finishGold
Rows1
Positions5
Contact finish thickness15.0µin (0.38µm)

Product details

5-Position IDC Plug, 0.100" Pitch, Gold Contacts

It terminates discrete 24-26 AWG wire via insulation displacement, eliminating the need for strip-and-crimp steps in harness assembly.

What the Gold Plating Buys You

The 15.0µin gold finish on the 281784-5 is the primary differentiator from the tin-plated 281786-5 (same 5 positions, same pitch, but 26-28 AWG and tin contacts). Gold resists oxidation and fretting corrosion better than tin, so the 281784-5 holds lower contact resistance over more mating cycles. If your application lives in a clean, low-cycle environment (one-time install, indoor equipment), the tin-plated 281783-4 (4 positions) or 281786-5 could save cost. If the connector will be mated and unmated during field service or test, the gold is the right call.

Mating and Wire Fit

Wire range is 24-26 AWG discrete; 26 AWG is explicitly supported per the spec. The IDC termination requires a hand or pneumatic press tool to push the wire into the slot; no wire stripping needed.

MPN
281784-5