Skip to main content
TE Connectivity AMP Connectors 3-640426-2

TE Connectivity 3-640426-2 MTA-156 Receptacle, 2 Pos, IDC

MPN 3-640426-2
Active

TE Connectivity MTA-156 receptacle, 3-640426-2, 2 positions, 1 row, 0.156" (3.96mm) pitch, IDC termination, 18 AWG discrete wire, tin contacts, locking ramp, free hanging.

$0.3300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesMTA-156
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

3-640426-2 specifications
ParameterValue
SeriesMTA-156
Wire typeDiscrete
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLocking Ramp
Wire gauge18 AWG
Cable terminationIDC
ColorOrange
Pitch0.156\" (3.96mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions2
Contact finish thickness80.0µin (2.03µm)

Product details

Two-Position IDC Receptacle for Power-Duty Wire Harnesses

The 0.156" (3.96mm) pitch is wider than the 0.100" signal standard — this spacing is sized for the insulation and conductor mass of 18 AWG power wiring, not for high-density signal routing. The closed-end housing prevents the wire from being pushed past the IDC slot during assembly — a practical safeguard against intermittent opens that can occur when an assembler over-inserts the conductor into an open-back housing. The orange colour is a visual key for the wire gauge or circuit function on the assembly line, though the functional spec is the same regardless of colour.

IDC Termination for 18 AWG Discrete Wire — Permanent, No Crimp Tool Needed

This receptacle uses insulation displacement contacts (IDC) for 18 AWG discrete wire. The trade-off is that the termination is permanent: once the wire is seated, it cannot be removed without cutting it off. The 18 AWG wire gauge is at the heavier end of the IDC range — the slot geometry is designed for the insulation diameter and conductor stiffness of 18 AWG, not for finer wire. Using a smaller gauge risks a loose fit in the slot; using a larger gauge may not fit at all.

MPN
3-640426-2