Skip to main content
TE Connectivity AMP Connectors 5111448-5

TE AMP-Latch 5111448-5, 24P IDC Plug, 0.100" Pitch

MPN 5111448-5
Active

TE Connectivity AMP-Latch series, Plug, 24 positions, 2 rows, 0.100" (2.54mm) pitch, IDC termination, Gold 30.0µin contact finish, Panel Mount, 26-28 AWG ribbon cable.

$12.3000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMP-Latch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5111448-5 specifications
ParameterValue
SeriesAMP-Latch
Wire typeRibbon Cable
TypeMale Pin
MountingPanel Mount
Connector typePlug
Wire gauge26-28 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageTray
FeaturesFeed Through
Row spacing0.100\" (2.54mm)
Contact finishGold
Rows2
Positions24
Contact finish thickness30.0µin (0.76µm)

Product details

AMP-Latch 24-Position IDC Plug for Ribbon Cable

The TE Connectivity AMP-Latch 5111448-5 is a 24-position IDC plug designed for mass-termination to 26-28 AWG ribbon cable. The black housing includes a feed-through feature, and the connector mounts to a panel, not the board, which keeps the cable exit clean in an enclosure.

This plug terminates ribbon cable with an IDC (Insulation Displacement Connection) — no wire stripping, no crimp tool, just a press. The 26-28 AWG range covers the common ribbon cable gauges for signal interconnects inside equipment. The feed-through feature lets the cable pass straight through the housing, which simplifies routing in a panel-mount setup where the cable enters from one side and exits the other.

The 5111448-5 mates with the standard AMP-Latch shrouded header (the 24-position, 0.100" pitch version) — the same series that has been a de facto ribbon-cable interconnect for decades. The plug mounts to a panel, not the PCB, so the header stays soldered to the board and the plug connects to the cable assembly. That panel-mount arrangement means the connector body takes the strain of cable pulls, not the header pins.

MPN
5111448-5