Skip to main content
TE Connectivity AMP Connectors 5536607-1

TE 5536607-1 Z-PACK Futurebus Receptacle, 8 Power, 6mm Pitch

MPN 5536607-1
Active

TE Connectivity Z-PACK Futurebus receptacle, 8 power positions, 4 rows, 0.236" (6.00mm) pitch, board edge mount, through-hole right-angle solder termination, gold flash contacts.

$7.5600 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesZ-PACK
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5536607-1 specifications
ParameterValue
SeriesZ-PACK
MountingBoard Edge, Through Hole, Right Angle
Connector typeReceptacle, Female Blade Sockets
Voltage rating30V
Operating temperature-55°C ~ 125°C
Material flammability ratingUL94 V-0
Pitch0.236\" (6.00mm)
PackageTube
FeaturesBoard Guide
TerminationSolder
Contact finishGold
Rows4
Positions8
Contact layout, typical8 Power
Contact finish thicknessFlash

Product details

8-Power Futurebus Receptacle for Backplane Power Distribution

All 8 positions are loaded as power contacts — no signal pins — so this is a dedicated power interconnect for a daughtercard drawing its main bus voltage from the backplane. The 0.236" (6.00mm) pitch provides enough spacing for the current each blade carries without crowding the board layout. Mounted at the board edge with a right-angle through-hole orientation, the receptacle routes the daughtercard parallel to the backplane — the standard arrangement for a card-cage system.

Gold Flash Contacts — Moderate Mating Cycle Duty

The contact finish is gold with a flash thickness — enough for the moderate cycle life typical of a backplane card edge (hundreds of insertions over the system's service life), but not specified for the thousands of cycles a hot-swap or frequent-reconnect application would demand. For a card that is inserted once at build and only pulled for service, flash gold is adequate; if the card is swapped weekly, upgrade to a thicker gold or a connector rated for higher mating cycles.

MPN
5536607-1