Skip to main content
TE Connectivity AMP Connectors 8-215570-6

TE Connectivity 8-215570-6 Micro-MaTch DIP Header, 16 Pos

MPN 8-215570-6
Active

TE Connectivity Micro-MaTch DIP header, 16 positions, 2 rows, 0.050" cable pitch, 0.100" board-side pitch, IDC termination, press-fit through-hole, tin contacts, red housing.

$2.4500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMicro-MaTch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

8-215570-6 specifications
ParameterValue
SeriesMicro-MaTch
MountingThrough Hole, Press-Fit
Connector typeRibbon Cable, DIP Header
Wire gauge28 AWG, Stranded or Solid
Cable pitch0.050\" (1.27mm)
Cable terminationIDC
ColorRed
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesFeed Through
Row spacing0.100\" (2.54mm)
Contact finishTin
Rows2
Board-Side pitch0.100\" (2.54mm)
Positions16

Product details

16-Position DIP Header for 28 AWG Ribbon Cable

It uses a press-fit through-hole mounting style — the compliant pins press into plated through-holes without solder, which suits backplane assemblies where rework or field replacement is a consideration. The red housing includes a feed-through feature that allows daisy-chaining multiple headers on the same cable run.

Board-Side Pitch and Footprint Fit

The press-fit termination means the holes must be plated through and sized to the compliant-pin geometry; the manufacturer's recommended hole diameter is in the product drawing.

IDC Termination and Tooling

Termination is IDC — insulation displacement contacts pierce the 28 AWG ribbon cable insulation in one press operation. No stripping or soldering is needed. The recommended tool is a manual or pneumatic IDC press with the correct die set for Micro-MaTch headers; the manufacturer's application tooling specification covers the required anvil and insertion force. The feed-through feature allows the cable to pass through the header, so multiple headers can be ganged on the same ribbon without cutting the cable between them.

MPN
8-215570-6