Skip to main content
Log in
11FLH-SM1-TB (LF)(SN)(F) — JST product photo
JST

JST FLH 11FLH-SM1-TB (LF)(SN)(F) FPC Connector, 0.50mm

MPN11FLH-SM1-TB (LF)(SN)(F)
Active

JST FLH series FPC connector, order code 11FLH-SM1-TB (LF)(SN)(F), 11 positions, single row, 0.50 mm pitch, 0.5 A, 50 V, tin-plated top contacts, surface-mount right-angle, solder termination, ZIF slide-lock actuator.

$0.6176Ref. price · indicative, final on quote
11FLH-SM1-TB (LF)(SN)(F) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

11FLH-SM1-TB (LF)(SN)(F) Technical Specifications
ParameterValue
SeriesFLH
Mounting typeSurface Mount, Right Angle
Cable end typeTapered
Flat flex typeFPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA66), Nylon 6/6
Height above board0.047\" (1.20mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions11

Product details

0.50 mm pitch, 11-position FPC socket with ZIF slide lock

The 11FLH-SM1-TB (LF)(SN)(F) is the 11-circuit member of JST's FLH series of FPC connectors, a 0.50 mm pitch ZIF socket with top-side contacts. Rated 0.5 A per contact at 50 V, the tin-plated contacts suit low-current signal or power connections where repeated mating cycles are limited.

Cable thickness and actuator orientation

The ZIF slide-lock actuator accepts a 0.30 mm thick FPC with a tapered cable end — the top-contact arrangement means the flex circuit's conductor pattern must face upward during insertion. Mated height above the board is 1.20 mm, and the right-angle SMT termination keeps the connector profile low for board-edge routing.

Frequently asked questions

What is the closest alternative in the FLH series if a different position count is needed?

The FLH series includes connectors at other position counts sharing the same 0.50 mm pitch, ZIF slide-lock, and top-contact configuration. The 11FLH-SM1-TB (LF)(SN)(F) is the 11-position variant; other position counts in the series are available for selection based on circuit requirements.