Skip to main content
Log in
20P-JMDSS-G-1-TF(LF)(SN) — JST product photo
JST

JAE JMD 20P-JMDSS-G-1-TF(LF)(SN), 20 pos, 0.50mm pitch

MPN20P-JMDSS-G-1-TF(LF)(SN)
Active

JAE JMD series plug, outer shroud contacts, 20 positions, 0.020" (0.50mm) pitch, 2 rows, surface mount, gold contact finish, 4.5mm mated stacking height, solder retention.

$1.3500Ref. price · indicative, final on quote
20P-JMDSS-G-1-TF(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

20P-JMDSS-G-1-TF(LF)(SN) Technical Specifications
ParameterValue
SeriesJMD
Mounting typeSurface Mount
Connector typePlug, Outer Shroud Contacts
Mated stacking heights4.5mm
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
Contact finishGold
Rows2
Positions20

Product details

The JAE 20P-JMDSS-G-1-TF(LF)(SN) is a 20-position plug from the JMD series, a board-to-board mezzanine connector family built around a 0.50mm pitch. Gold plating on the contacts handles the repeated mating cycles these assemblies see during test and final integration.

0.50mm pitch is the fine-pitch territory where board routing density and alignment tolerance become the limiting factors, not the contact current rating. At this spacing, the PCB trace escape between pads is tight — expect micro-via or HDI board layers if routing more than one signal per channel.

Frequently asked questions

What is the pitch of 20P-JMDSS-G-1-TF?

The pitch is 0.020" (0.50mm), which is the center-to-center spacing between adjacent contacts.

What is the mated stacking height for 20P-JMDSS-G-1-TF?

The mated stacking height is 4.5mm when mated with the matching JMD receptacle.

Is 20P-JMDSS-G-1-TF RoHS compliant?

Yes, it is RoHS Compliant.