Skip to main content
Log in
27FLZ-RSM2-TB(LF)(SN) — JST product photo
JST

JST 27FLZ-RSM2-TB(LF)(SN) FFC Connector 0.50mm 27 Pos ZIF

MPN27FLZ-RSM2-TB(LF)(SN)
Active

JST FLZ series, 27-position FFC/FPC connector, 0.50 mm pitch, bottom-contact, right-angle SMT, ZIF slide-lock, tin-plated phosphor bronze contacts, 0.5 A, 50 V, UL94 V-0 housing.

$1.5700Ref. price · indicative, final on quote
27FLZ-RSM2-TB(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

27FLZ-RSM2-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesFLZ
Mounting typeSurface Mount, Right Angle
Cable end typeTapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-25°C~85°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA6T), Nylon 6T
Actuator materialPolyamide (PA6T), Nylon 6T
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions27

Product details

Contact and Current Duty

The 27FLZ-RSM2-TB(LF)(SN): The tin-plated phosphor bronze contacts handle repeated mating cycles in low-voltage digital or analog signal chains. The ZIF (zero insertion force) actuator with slide lock lets you insert the FPC without stressing the foil traces, then locks it in place against vibration.

Cable Compatibility

Accepts standard 0.50 mm pitch FFC or FPC cables with a tapered end and 0.30 mm thickness — common for off-the-shelf ribbon stock. Bottom-contact configuration means the cable traces face the board, suited for direct routing to the PCB pads without a crossover layer.

RoHS compliant.

Frequently asked questions

Is the 27FLZ-RSM2-TB(LF)(SN) compatible with standard 0.5mm pitch FFC cables?

Yes. Use a tapered-end FPC for best insertion.

What is the maximum current rating for the 27FLZ-RSM2-TB(LF)(SN)?

This is a signal-level connector; do not use for power distribution.