Skip to main content
Log in
70PS-JMDSS-G-1-TF(LF)(SN) — JST product photo
JST

JST 70PS-JMDSS-G-1-TF(LF)(SN) JMD Series Plug, 70 Pos

MPN70PS-JMDSS-G-1-TF(LF)(SN)
Active

JST JMD series plug, outer shroud contacts, 70 positions, 2 rows, 0.020" (0.50mm) pitch, surface mount right angle, gold contact finish, solder retention, Tape & Reel.

$1.4794Ref. price · indicative, final on quote
70PS-JMDSS-G-1-TF(LF)(SN) datasheet
StockIn Stock (23)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

70PS-JMDSS-G-1-TF(LF)(SN) Technical Specifications
ParameterValue
SeriesJMD
Mounting typeSurface Mount, Right Angle
Connector typePlug, Outer Shroud Contacts
Height above board0.189\" (4.80mm)
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
Contact finishGold
Rows2
Positions70

Product details

JMD 70-Position Plug — 0.50 mm Pitch, Right-Angle SMT

The JST 70PS-JMDSS-G-1-TF(LF)(SN) is a 70-position plug from the JMD series, using outer shroud contacts on a 0.020" (0.50 mm) pitch in two rows.

70 Circuits at 0.50 mm — What That Means for Your Layout

The right-angle SMT termination places the contact tails on the same side of the board. Solder retention features help hold the part during reflow.

Frequently asked questions

What is the pinout of 70PS-JMDSS-G-1-TF(LF)(SN)?

The pinout follows the JMD series standard: pin 1 is typically located at the corner indicated by the chamfer or key on the connector body. Refer to the JST JMD series product drawing for the exact numbering sequence.