JST ZE series, Board to Cable/Wire, Header, 5 Positions, 1.50mm Pitch, Through Hole, Tin Contacts, Locking Ramp, UL94 V-0
| Parameter | Value |
|---|---|
| Series | ZE |
| Gender | Outer Shroud Contact |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.335\" (8.51mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Kinked Pin, Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 5 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
The 4-wall shrouding and locking ramp protect the mating interface and prevent accidental disconnection under vibration.
Termination is through-hole with kinked pins for solder retention during wave soldering. The contact length after the board is 0.134" (3.40mm), and the insulation height above the board is 0.335" (8.51mm).
The mating connector is a JST ZE series crimp-style receptacle housing. The header's locking ramp engages with the receptacle latch for a secure connection. The specific receptacle part number depends on the wire count and orientation needed.