Skip to main content
Log in
B12B-PASK-1(LF)(SN) — JST product photo
JST

B12B-PASK-1(LF)(SN) JST PA Header 12 Pos 2mm Locking Ramp

MPNB12B-PASK-1(LF)(SN)
Active

JST Sales America Inc., PA series, Board to Cable/Wire header, 12 positions, 2.00 mm pitch, shrouded 4-wall, locking ramp, through hole, tin-plated contacts, 3 A, 250 V, UL94 V-0.

$0.7900Ref. price · indicative, final on quote
B12B-PASK-1(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B12B-PASK-1(LF)(SN) Technical Specifications
ParameterValue
SeriesPA
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.303\" (7.70mm)
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
Mated stacking heights9.9mm, 14.7mm, 14.9mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions12
Contact finish - postTin
Contact length - post0.118\" (3.00mm)
Overall contact length0.319\" (8.10mm)
Contact finish - matingTin
Contact length - mating0.126\" (3.20mm)

Product details

Mating Connector and Harness Planning

The B12B-PASK-1(LF)(SN): For a 12-circuit harness, order the matching PA receptacle housing (e.g., JST part number 12P-SFN or similar PA-series 12-position housing) and the appropriate crimp terminals (SPHD-001T-P0.5 or equivalent).

Stack Height and Board Spacing Options

Three mated stack heights are listed: 9.9 mm, 14.7 mm, and 14.9 mm — the variation comes from different PA receptacle housing depths. This lets the same header serve multiple enclosure z-height budgets without a board layout change.

Frequently asked questions

What is the mating connector for B12B-PASK-1(LF)(SN)?

The mating half is a JST PA series crimp receptacle housing (e.g., 12P-SFN or equivalent 12-position PA housing) with 2.00 mm pitch crimp terminals (SPHD-001T-P0.5 or similar).

What is the lead time for B12B-PASK-1(LF)(SN)?

Lead time is confirmed at quote time against the specific order quantity. As an active part, typical lead time is quoted per RFQ — no standard lead time is published.