Skip to main content
Log in
B20B-PADSS(LF)(SN) — JST product photo
JST

JST PAD B20B-PADSS(LF)(SN) Header, 20-Pos 2.00mm

MPNB20B-PADSS(LF)(SN)
Active

JST PAD series header, order code B20B-PADSS(LF)(SN), 20 positions, dual row, 2.00 mm pitch, 3 A, 250 V, tin-plated mating contacts, through-hole, solder termination, shrouded with locking ramp.

$0.9700Ref. price · indicative, final on quote
B20B-PADSS(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B20B-PADSS(LF)(SN) Technical Specifications
ParameterValue
SeriesPAD
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Mated stacking heights12.4mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions20
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

20-position 2.00 mm pitch header

The B20B-PADSS(LF)(SN) is the 20-circuit member of JST's PAD series board-to-cable/wire header line. It carries tin-plated mating contacts rated 3 A at 250 V, mounts through-hole, and uses a locking ramp for positive retention.

Series & positions

Within the PAD series the B20B-PADSS(LF)(SN) sits at 20 positions on a 2.00 mm pitch, dual-row layout with 2.00 mm row spacing. The mated stacking height is 12.4 mm. The pitch, footprint, and tin-plated contacts are shared across the series — match the position count to circuit count.