Skip to main content
Log in
B24B-KRWHK-C(LF)(SN) — JST product photo
JST

JST B24B-KRWHK-C(LF)(SN) KRW Header 24 Pos 2.00mm Pitch

MPNB24B-KRWHK-C(LF)(SN)
Active

JST KRW series, Board to Cable/Wire, 24 Positions, 2 Rows, 0.079" (2.00mm) Pitch, Through Hole, Press-Fit/Solder, Shrouded - 4 Wall, Latch Holder, Tin Contacts, UL94 V-0, Active

$1.1700Ref. price · indicative, final on quote
B24B-KRWHK-C(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B24B-KRWHK-C(LF)(SN) Technical Specifications
ParameterValue
SeriesKRW
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating100VAC/DC
Current rating1A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorGray
Insulation height0.295\" (7.50mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions24
Row spacing - mating0.256\" (6.50mm)
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

Press-Fit and Solder Termination for Reflow-Friendly Assembly

The B24B-KRWHK-C(LF)(SN): This header uses a hybrid press-fit and solder termination. The press-fit tails hold the component in place during wave or selective solder reflow, preventing skew from board handling. The 3.40 mm post length provides enough stand-off for the solder fillet to form without wicking into the contact interface. The through-hole mounting style with square male pins mates with standard KRW series crimp receptacles.

The B24B-KRWHK-C(LF)(SN) sits at 24 positions — the B22B-KRWHK-C(LF)(SN) (22 positions) and B28B-KRWHK-C(LF)(SN) (28 positions) are direct siblings with identical electrical ratings and material specs. The choice is purely the circuit count needed on the BOM.

Frequently asked questions

What is the exact pitch and mounting type of the B24B-KRWHK-C(LF)(SN)?

The header mounts through-hole with a hybrid press-fit and solder termination.

What is the mating connector for the B24B-KRWHK-C(LF)(SN)?

This header mates with a KRW series receptacle housing and matching crimp terminals (sold separately).