JST PH header, order code B2B-PH-K-S(LF)(SN), 2 positions, single row, 0.079" (2.00mm) pitch, 2 A, 100 V, tin-plated mating contacts, through-hole, shrouded - 4 wall, detent lock, press-fit solder termination.
JST PH header, order code B2B-PH-K-S(LF)(SN), 2 positions, single row, 0.079" (2.00mm) pitch, 2 A, 100 V, tin-plated mating contacts, through-hole, shrouded - 4 wall, detent lock, press-fit solder termination.
$0.1000Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
- New & original stockTraceable channels only — no mixed lots, no re-taped reels.
- Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
- Photo-verified countsEvery line counted and photographed before the box closes.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Series | PH |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.236\" (6.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Mated stacking heights | 8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Overall contact length | 0.333\" (8.45mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
Product details
Frequently asked questions
Will B2B-PH-K-S(LF)(SN) drop into a panel that was specified around B3B-PH-K-S(LF)(SN) without rewiring?
No — the B3B-PH-K-S(LF)(SN) is a 3-position header; the 2-position B2B-PH-K-S(LF)(SN) shares the same pitch, mounting, and contact plating but has one fewer circuit, so a panel wired for three circuits would require rewiring to use the 2-position part.