Skip to main content
Log in
B3B-PH-TW-S(LF)(SN) — JST product photo
JST

JST B3B-PH-TW-S(LF)(SN) PH Series 3-Pin Plug, 2.00 mm Pitch

MPNB3B-PH-TW-S(LF)(SN)
Active

JST PH series, 3-position plug adapter, 0.079" (2.00mm) pitch, free-hanging (in-line) mount, single row, male pins on both ends, bulk package.

$0.4700Ref. price · indicative, final on quote
B3B-PH-TW-S(LF)(SN) datasheet
StockIn Stock (14)
Lead time3-5 Days wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B3B-PH-TW-S(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
Mounting typeFree Hanging (In-Line)
Pitch0.079\" (2.00mm)
PackageBulk
Rows1
Positions3
Convert to (Adapter end)Plug, Male Pins
Convert from (Adapter end)Plug, Male Pins

Product details

3-Position In-Line Plug Adapter for Wire Harness Routing

As a free-hanging (in-line) component, it is designed for panel or harness integration where a board-mounted header is not an option.

The in-line mount means the connector body is crimped or soldered to wires, then inserted into the mating housing; no PCB footprint is required. For a standard wire-to-board connection, one side would plug into a PH-series board-mount header (e.g., B3B-PH-K-S).

3 Positions vs. 2 Positions in the PH Series

The B3B-PH-TW-S(LF)(SN) carries 3 positions at the same 2.00 mm pitch as the 2-position B2B-PH variant. The extra circuit lets you route a three-wire signal or power line (e.g., Vcc, GND, signal) through a single connector body rather than splitting across two separate 2-position plugs. Pitch, mounting style, and series compatibility are identical — the position count is the only selection difference.

Frequently asked questions

What is the compatible receptacle for the B3B-PH-TW-S(LF)(SN)?

This plug adapter mates with any JST PH-series receptacle housing (e.g., PHR-3) on the same 2.00 mm pitch, single-row layout. Both ends are male pins, so the mating half on each side is a female receptacle housing.