JST VH series, Board to Cable/Wire Header, 4 Positions, 0.156" (3.96mm) Pitch, Through Hole, Solder Termination, Tin Plated Male Pins, Shrouded - 1 Wall, Locking Ramp, 10A, 250V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | VH |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 10A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.370\" (9.40mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Mated stacking heights | 16.5mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact length - post | 0.146\" (3.70mm) |
| Overall contact length | 0.575\" (14.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.303\" (7.70mm) |
The single-wall shroud leaves one side of the pins exposed — this is a design choice that simplifies housing alignment but does not provide full perimeter protection.
The B4PS-VH is the right-angle version of this 4-position header with the same pitch, tin plating, and locking ramp. The B4P-VH(LF)(SN) is vertical; the B4PS-VH exits at a right angle.
The B4P-VH(LF)(SN) is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock-holding or price commitment is made on this listing.