JST VH series, Header, 4 Positions, 0.156" (3.96mm) Pitch, 1 Row, Through Hole, Right Angle, Solder, Tin, 10A, 250V, Shrouded - 1 Wall, Locking Ramp, UL94 V-0, Bulk.
| Parameter | Value |
|---|---|
| Series | VH |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 10A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.335\" (8.51mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact length - post | 0.142\" (3.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.303\" (7.70mm) |
Rated 10 A per circuit at 250 V, the current capacity is limited by the tin plating rather than the contact cross-section — tin contacts handle the rating but wear faster under repeated mating than gold. The 3.96 mm pitch provides generous creepage for 250 V without crowding the board.
The locking ramp engages with the receptacle's latch for a tactile lock confirmation on assembly.
The B4PS-VH(LF)(SN) mates with the JST VHR-4N receptacle housing and uses SVH-21T-P1.1 crimp terminals for 18-22 AWG wire.
The B4PS-VH(LF)(SN) uses a 0.156" (3.96 mm) pitch.
The (LF)(SN) suffix in the order code indicates lead-free and tin-plated termination, consistent with RoHS compliance for this JST VH series header.