Skip to main content
Log in
B5P-VH(LF)(SN) — JST product photo
JST

JST B5P-VH(LF)(SN) VH Series Header, 5 Pos, 3.96mm Pitch

MPNB5P-VH(LF)(SN)
Active

JST VH Series, Header, 5 Positions, 0.156" (3.96mm) Pitch, 10A, 250V, Through Hole, Solder, Tin Plating, Locking Ramp, UL94 V-0

$0.3700Ref. price · indicative, final on quote
B5P-VH(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B5P-VH(LF)(SN) Technical Specifications
ParameterValue
SeriesVH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating10A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.370\" (9.40mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights16.5mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 1 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.156\" (3.96mm)
Positions5
Contact finish - postTin
Contact length - post0.146\" (3.70mm)
Overall contact length0.575\" (14.60mm)
Contact finish - matingTin
Contact length - mating0.303\" (7.70mm)

Product details

VH Series 5-Position Power Header

It carries a 0.156" (3.96 mm) pitch — wide enough to handle the 10 A per circuit rating without crowding the PCB traces, and the 250 V voltage rating suits appliance-level power distribution.

Ratings and Construction

Rated 10 A per circuit at 250 V, the B5P-VH(LF)(SN) uses tin-plated brass contacts on both the mating and post sides — the tin finish is well-suited for the rated current and typical appliance operating temperatures, though it limits mating cycle life compared to gold. The PA66 nylon housing carries a UL94 V-0 flammability rating, required for equipment inside an enclosure. The through-hole solder termination with a 0.146" (3.70 mm) post length provides a reliable mechanical anchor on the PCB.

The overall contact length of 0.575" (14.60 mm) includes a 0.303" (7.70 mm) mating section, giving enough wipe for reliable contact even with slight board-to-harness misalignment.

Frequently asked questions

What is the pitch of the B5P-VH(LF)(SN)?

The pitch is 0.156" (3.96 mm), which is the center-to-center spacing between adjacent pins — this determines the PCB footprint layout.