Skip to main content
Log in
B6B-PH-K-S(LF)(SN) — JST product photo
JST

B6B-PH-K-S(LF)(SN) JST PH Header 6 Pos 2mm Through Hole

MPNB6B-PH-K-S(LF)(SN)
Active

JST Sales America Inc. PH series, Board to Cable/Wire, Header, Male Pin, 6 Positions, 2.00mm Pitch, Through Hole, Tin Mating Finish, Detent Lock, UL94 V-0

$0.3400Ref. price · indicative, final on quote
B6B-PH-K-S(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B6B-PH-K-S(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.236\" (6.00mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights8mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions6
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Overall contact length0.333\" (8.45mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

6-Pin 2mm Header for Wire-to-Board Harnesses

The B6B-PH-K-S(LF)(SN): Its 2.00mm pitch and through-hole termination make it a compact, reliable interconnect for signal-level circuits in consumer electronics, industrial controls, and automotive interior modules.

This header mates with JST PH series crimp-style receptacle housings using the SPH-002T-P0.5S or equivalent crimp terminals. The 8mm mated stacking height keeps the assembly low-profile on the board. Termination is press-fit, solder — the square pins (0.64mm typical) insert into plated through-holes and are wave-soldered. The 3.40mm post length provides adequate through-hole fill for standard 1.6mm PCBs.

Frequently asked questions

What is the difference between B6B-PH-K-S(LF)(SN) and B6B-PH-K-S?

The (LF)(SN) suffix indicates lead-free and tin-plated contacts. The base part B6B-PH-K-S may have a different plating or lead content; the (LF)(SN) variant is the current ROHS3-compliant version with tin mating finish.

Does B6B-PH-K-S(LF)(SN) mate with JST PH series crimp housings?

Yes, it mates with JST PH series receptacle housings such as PHR-6, using the SPH-002T-P0.5S crimp terminal. The 2.00mm pitch and 8mm mated stack height are standard for the series.