Skip to main content
Log in
B6B-PH-SM4-TB(LF)(SN) — JST product photo
JST

JST PH B6B-PH-SM4-TB(LF)(SN) Header, 6-Pos 2.00mm

MPNB6B-PH-SM4-TB(LF)(SN)
Active

JST PH series header, order code B6B-PH-SM4-TB(LF)(SN), 6 positions, single row, 2.00 mm pitch, 2 A, 100 V, tin-plated mating contacts, surface-mount, solder termination, shrouded - 4 wall.

$0.7900Ref. price · indicative, final on quote
B6B-PH-SM4-TB(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B6B-PH-SM4-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.260\" (6.60mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Mated stacking heights8.6mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions6
Contact finish - postTin
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

2 A, 100 V signal duty

The B6B-PH-SM4-TB(LF)(SN) is the 6-circuit member of JST's PH series board-to-cable/wire header line. Rated 2 A per contact at 100 V, the tin-plated mating contacts suit moderate-duty signal interconnects within a -25°C to 85°C operating range.

Shrouded SMT with detent lock

The 4-wall shrouded housing with detent lock provides polarization and retention against cable pull, while the solder retention feature holds the part during reflow. Mated stacking height is 8.6 mm; the header accepts square male pins with a mating contact length of 0.130" (3.30 mm).