Skip to main content
Log in
B7B-PH-K-S(LF)(SN) — JST product photo
JST

JST B7B-PH-K-S(LF)(SN) 2mm Pitch 7-Pin Header

MPNB7B-PH-K-S(LF)(SN)
Active

JST Sales America Inc. PH series, Board to Cable/Wire, 7 Positions, 0.079" (2.00mm) Pitch, Through Hole, Shrouded - 4 Wall Header, Bulk, Active

$0.4000Ref. price · indicative, final on quote
B7B-PH-K-S(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B7B-PH-K-S(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.236\" (6.00mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights8mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions7
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Overall contact length0.333\" (8.45mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

7-Position, 2.00mm Pitch — the Board-Footprint Lock

The B7B-PH-K-S(LF)(SN) is a 7-position, single-row male header from JST's PH series, pitched at 2.00 mm. The 4-wall shroud protects the pins from stubbing during blind mating — a common failure in harness assembly when the operator can't see the entry angle.

Active Production — No Last-Time-Buy Chase Needed

No EOL notice, no last-time-buy window to track. Sourced per RFQ against your target quantity.

Board-to-Wire Fit — Mates With PH Series Receptacles

This header is designed for Board to Cable/Wire interconnect. It mates with JST PH series crimp receptacles.

Frequently asked questions

What is the mating connector for B7B-PH-K-S(LF)(SN)?

It mates with JST PH series crimp receptacles, such as PHR-7 housing with SPH-002T-P0.5S terminals. The mated stack height is 8 mm.