JST ZH series, 7-circuit, 1.50 mm pitch, vertical through-hole header, shrouded 4-wall, detent lock, tin-plated male pins, rated 1 A at 50 V, UL94 V-0 housing, RoHS.
| Parameter | Value |
|---|---|
| Series | ZH |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.177\" (4.50mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Mated stacking heights | 5.6mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Circular |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 7 |
| Contact finish - post | Tin |
| Contact length - post | 0.106\" (2.69mm) |
| Overall contact length | 0.256\" (6.50mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.094\" (2.40mm) |
Mated stack height is 5.6 mm, which sets the clearance between the board and the wire exit of the mating housing.
Operating temperature runs from -25°C to 85°C, so it suits indoor equipment and automotive cabin environments but not under-hood or oven-adjacent locations.
This header mates with a JST ZH series crimp receptacle housing. The 1.50 mm pitch and detent lock are common across the series; the mating half uses the same ZH terminal and housing keying.