Skip to main content
Log in
B8B-PH-K-S(LF)(SN) — JST product photo
JST

JST B8B-PH-K-S(LF)(SN) Pin Header – 8 Pos, 2 mm Pitch

MPNB8B-PH-K-S(LF)(SN)
Active

JST Sales America Inc. PH series, Board to Cable/Wire, Header, Male Pin, 8 Positions, 0.079" (2.00mm) Pitch, Through Hole, Shrouded - 4 Wall, Detent Lock, Tin Mating Finish, 2 A, 100 V, UL94 V-0, Bulk, Active, ROHS3 Compliant

$0.4400Ref. price · indicative, final on quote
B8B-PH-K-S(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B8B-PH-K-S(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.236\" (6.00mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights8mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions8
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Overall contact length0.333\" (8.45mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

2.00 mm Pitch, 8-Position Shrouded Header — JST PH Series

Mated stack height is 8 mm, so plan for that z-height clearance in the enclosure after the receptacle is mated.

Position-Count Alternatives in the Same Footprint

The PH series offers identical 2.00 mm pitch, 8 mm stack height, and electrical ratings across position counts. The 8-position B8B-PH-K-S(LF)(SN) sits between the 7-position B7B-PH-K-S(LF)(SN) and the 9-position B9B-PH-K-S(LF)(SN) — a direct swap if the BOM needs one more or one fewer circuit, with no board layout change beyond the pin count. For higher density, the 10-position B10B-PH-K-S(LF)(SN) shares the same footprint and ratings, adding two circuits in the same row length.

Mating with JST PH Crimp Housings

This header mates with JST PH series crimp receptacle housings (e.g., PHR-8) using the appropriate crimp terminals (SPH-002T-P0.5S). The shroud is keyed so the receptacle can only be inserted one way, preventing reverse mating. Termination is through-hole press-fit with solder — the tails are tin-plated for good wetting during wave or hand soldering.

Frequently asked questions

Is B8B-PH-K-S(LF)(SN) RoHS compliant?

Yes, it is ROHS3 Compliant per JST's listing, meeting the latest RoHS directive for lead-free solder processes.

What is the closest functional second-source for B8B-PH-K-S(LF)(SN)?

The B9B-PH-K-S(LF)(SN) is the 9-position peer in the same PH series, with identical pitch, stack height, current, and voltage ratings. It is a direct position-count alternative if the BOM allows one extra circuit.

Can B8B-PH-K-S(LF)(SN) be used with JST PH crimp housings?

Yes, it mates with JST PH series receptacle housings (e.g., PHR-8) using SPH-series crimp terminals. The detent lock and 4-wall shroud ensure correct orientation and secure retention.