Skip to main content
Log in
B8B-PH-SM4-TBT(LF)(SN) — JST product photo
JST

B8B-PH-SM4-TBT(LF)(SN) JST PH 8-Pos 2mm SMT Header

MPNB8B-PH-SM4-TBT(LF)(SN)
Active

JST PH series, B8B-PH-SM4-TBT(LF)(SN), 8-position, 2.00mm pitch, shrouded SMT header, male pin, tin-plated contacts, 2 A, 100 V, -25°C to 85°C, UL94 V-0 natural PA6T housing.

$1.1100Ref. price · indicative, final on quote
B8B-PH-SM4-TBT(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B8B-PH-SM4-TBT(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.260\" (6.60mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Mated stacking heights8.6mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesPick and Place, Solder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions8
Contact finish - postTin
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

Board Fit and Pinout

The B8B-PH-SM4-TBT(LF)(SN): The 2 A per-contact rating at 100 V suits signal and low-power distribution inside control panels, sensors, and consumer electronics. The -25°C to 85°C range covers most indoor and sheltered outdoor gear.

Mounting and Assembly

The 8.6 mm mated stack height and 6.60 mm insulation height mean the header stands off the board enough to clear components under the receptacle body.

Mechanical Protection and Mating

For higher cycle life, the gold-plated PH variants are a better fit.

Peer Comparison: 8 vs 9 Positions

If your BOM calls for 8 positions, this is the correct count; the 9-position variant adds 2 mm to the board footprint.

Frequently asked questions

What is the mating connector housing for B8B-PH-SM4-TBT(LF)(SN)?

It mates with JST PH series crimp receptacle housings, such as the PHR-8 (8-position) or the corresponding double-row variants, using the SPH-002T-P0.5S or equivalent tin-plated crimp terminals.

What is the pitch of B8B-PH-SM4-TBT(LF)(SN)?

The mating pitch is 2.00 mm (0.079").

Where can I buy B8B-PH-SM4-TBT(LF)(SN) with stock?

This part is sourced per RFQ through independent distribution.