JST Sales America Inc., EH series, Board to Cable/Wire header, 9 positions, 1 row, 0.098" (2.50mm) pitch, Through Hole, Tin contacts, Friction Lock, 3A, 250V, UL94 V-0, Active, RoHS.
| Parameter | Value |
|---|---|
| Series | EH |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Friction Lock |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.236\" (6.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Mated stacking heights | 8.1mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 3 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 9 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
It mates with the corresponding EH series crimp receptacle housing (e.g., EHR-9 or equivalent) using the SXH-001T-P0.6 or SEH-001T-P0.6 crimp terminals.
Tin is cost-effective for applications with fewer than 50 mating cycles — typical for one-time assembly or infrequent field service.
Buyers need to ensure the connector can handle the required current for their application.
Users must know the correct crimp housing or IDC connector to complete the connection.
This is the primary application described, but clarity confirms fit in the design.
Engineers and hobbyists need low-qty sources; large distributors may not offer break quantities.
Compliance with environmental regulations is mandatory for many designs.
Buyers need to plan production schedules and avoid delays.