Skip to main content
Log in
B9P-VH(LF)(SN) — JST product photo
JST

JST B9P-VH(LF)(SN) VH Header, 9-Circuit, 3.96mm Pitch, 10A

MPNB9P-VH(LF)(SN)
Active

JST VH Series, Header, Board to Cable/Wire, 9 circuits, 1 row, 0.156" (3.96 mm) pitch, Through Hole, Solder, Tin contact finish, 10 A, 250 V.

$0.5600Ref. price · indicative, final on quote
B9P-VH(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B9P-VH(LF)(SN) Technical Specifications
ParameterValue
SeriesVH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating10A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.370\" (9.40mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights16.5mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 1 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.156\" (3.96mm)
Positions9
Contact finish - postTin
Contact length - post0.146\" (3.70mm)
Overall contact length0.575\" (14.60mm)
Contact finish - matingTin
Contact length - mating0.303\" (7.70mm)

Product details

JST B9P-VH(LF)(SN) — 9-Circuit VH Series Header

Current Rating and Thermal Reality

Rated 10 A at 250 V, this header carries the current per circuit typical of the VH series for power distribution. In a cabinet running at 55°C in summer, derate the per-circuit current.

Mating and Termination Fit

The through-hole solder termination uses a 0.146" (3.70 mm) post length, and the overall contact length is 0.575" (14.60 mm). The 3.96 mm pitch and single-row layout are straightforward for PCB layout: one row of 9 plated through-holes at 3.96 mm centers.

Frequently asked questions

What is the mating connector for B9P-VH(LF)(SN)?

The B9P-VH(LF)(SN) mates with JST VH series receptacle housings that accept crimp terminals. The locking ramp on the header engages with the mating half for vibration-resistant connection.

What is the pin spacing of B9P-VH(LF)(SN)?

The pin spacing (pitch) is 0.156" (3.96 mm), which is the standard JST VH series footprint.