Skip to main content
Log in
BE2P-SHF-1AA(LF)(SN) — JST product photo
JST

JST BE2P-SHF-1AA(LF)(SN) NH Header 2 Pos 2.5mm Pitch

MPNBE2P-SHF-1AA(LF)(SN)
Active

JST Sales America Inc., NH series, Board to Cable/Wire header, 2 positions, 0.098" (2.50mm) pitch, unshrouded, through-hole solder, friction lock, 3 A, 250 V, UL94 V-0.

$0.4600Ref. price · indicative, final on quote
BE2P-SHF-1AA(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

BE2P-SHF-1AA(LF)(SN) Technical Specifications
ParameterValue
SeriesNH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader, Bottom Entry
Fastening typeFriction Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.394\" (10.00mm)
Insulation materialPolyamide (PA6), Nylon 6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions2
Contact finish - postTin
Contact length - post0.130\" (3.30mm)
Contact finish - matingTin
Contact length - mating0.236\" (6.00mm)

Product details

2.50 mm Pitch, Friction Lock, 2 Positions

The BE2P-SHF-1AA(LF)(SN): The unshrouded design leaves the square male pins exposed — you probe them or mate them with the matching NH receptacle housing. The 3 A current rating is the thermal ceiling for the nylon 6 housing at 85°C ambient — stay below that and the temperature rise stays inside the material limit. Tin plating is fine for occasional mating; if the connector sees frequent disconnect cycles in a corrosive environment, step up to a gold-plated variant in the series.

Through-Hole Solder Tail for Board Retention

The insulation height of 0.394" (10.00 mm) gives clearance for the mating housing latch.

The part is RoHS compliant.

How It Compares to 4- and 5-Position Siblings

The 2-position BE2P-SHF-1AA(LF)(SN) shares the same 2.50 mm pitch, 3 A rating, friction lock, and unshrouded format as the 4-position BE4P-SHF-1AA(LF)(SN) and 5-position BE5P-SHF-1AA(LF)(SN). All three are active and RoHS compliant.

Frequently asked questions

What is the pitch of BE2P-SHF-1AA(LF)(SN)?

The mating pitch is 0.098" (2.50 mm).

Is BE2P-SHF-1AA(LF)(SN) shrouded or unshrouded?

It is unshrouded — the male pins are exposed. There is no polarization guide, so the mating housing must be keyed correctly to avoid misalignment.

Does BE2P-SHF-1AA(LF)(SN) have a friction lock?

Yes, it has a friction lock on the top of the header.

What is the mounting type of JST BE2P-SHF-1AA(LF)(SN)?

Through-hole solder termination.

What is the closest functional second-source for BE2P-SHF-1AA(LF)(SN)?

The closest match is BE2P-SHF-1AA — same 2-position, 2.50 mm pitch, unshrouded header from the same NH series. The (LF)(SN) suffix indicates lead-free and tin plating; the base part is functionally identical.