JST SH/SR series, 2-position, 1.00mm pitch, surface-mount header, male pin, tin-plated contacts, shrouded 4-wall, push-pull latch, 1 A, 50 V, 4.9mm mated stack height, UL94 V-0 natural nylon housing.
| Parameter | Value |
|---|---|
| Series | SH/SR |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.167\" (4.25mm) |
| Insulation material | Polyamide (PA), Nylon |
| Mated stacking heights | 4.9mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The 1.00mm pitch sets the PCB footprint density — tight enough for compact layouts but wide enough for manual soldering inspection. This makes it a good fit for harnesses that see occasional disconnect in service.
Mates with JST SH/SR series receptacles (crimp or IDC type) for a wire-to-board connection.
No stock-holding claim — each order is sourced fresh.
The BM02B-SRSS-TBT is the nearest alternative — same 2-position, 1.00mm pitch, 1 A rating, and 4.9mm stack height, but with an added pick-and-place feature for automated SMT placement. Both are active and RoHS compliant.