JST NSH series, 5-position, 1-row, shrouded header, 1.00 mm pitch, surface-mount, tin-plated male pins, rated 1 A at 50 V, with latch holder and pick-and-place cap.
| Parameter | Value |
|---|---|
| Series | NSH |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.236\" (6.00mm) |
| Insulation material | Polyamide (PA), Nylon |
| Mated stacking heights | 7.8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place Cap, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 5 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The BM05B-NSHSS-TBT(LF)(SN): This header includes a pick-and-place cap for automated SMT assembly, and solder retention features improve joint reliability during reflow.
No official second-source or direct replacement is listed, but the NSH series includes 4-position (BM04B-NSHSS-TBT) and 6-position (BM06B-NSHSS-TBT) variants with identical pitch, stack height, and current rating for BOM flexibility.
This header mates with a JST NSH series receptacle housing (not included). The mating half uses the same 1.00 mm pitch and latch holder system. Confirm the receptacle part number against your harness design.
The pitch is 0.039" (1.00 mm).