JST PA series, Board to Cable/Wire, Header, Male Pin, 9 Positions, 2.00 mm Pitch, Surface Mount, Tin Mating Finish, Locking Ramp, Natural Nylon Housing, UL94 V-0
| Parameter | Value |
|---|---|
| Series | PA |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.350\" (8.89mm) |
| Insulation material | Polyamide (PA), Nylon |
| Mated stacking heights | 11.1mm, 16mm, 16.2mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Board Guide, Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 9 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The same header footprint supports three mated stacking heights: 11.1 mm, 16 mm, and 16.2 mm. Which one you get depends on the mating receptacle housing and the crimp terminal used — the header itself is the common PCB-side anchor. The pick-and-place surface is flat for vacuum nozzle pickup.
Yes. The (LF)(SN) suffix indicates lead-free and RoHS-compliant with tin-plated contacts. No separate RoHS certificate is needed for BOM compliance verification.
It mates with the JST PA series crimp receptacle housing — the 9-position PAP-09V or PHR-09. The locking ramp on the header engages the latch on the receptacle. Confirm the housing part number against your wire gauge and terminal selection.