JST NSH series, 10-position single-row shrouded header, 1.00 mm pitch, surface-mount, latch holder, tin-plated contacts, 1 A, 50 V, UL94 V-0, RoHS.
| Parameter | Value |
|---|---|
| Series | NSH |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.236\" (6.00mm) |
| Insulation material | Polyamide (PA), Nylon |
| Mated stacking heights | 7.8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The 7.8 mm mated stack height gives a clear z-height budget for the mating receptacle and cable bend radius above the PCB.
The tin-plated posts mate with the PCB pads; the solder retention anchors the body against the shear force from cable strain.
It is RoHS compliant per. Sourced through independent distribution channels.
The BM10B-NSHSS-TBT (LF)(SN) is sourced through independent distribution. No stock-holding claim is made — each RFQ is handled individually.
The 1.00 mm pitch and latch holder are common to the NSH family; confirm the circuit count and keying orientation match the receptacle side before ordering.