JST SHD series, 50-position dual-row shrouded header, 1.00 mm pitch, surface mount, gold-plated male pins, natural PA housing, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | SHD |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Phosphor Bronze |
| Insulation color | Natural |
| Insulation height | 0.167\" (4.25mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Mated stacking heights | 6.3mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 50 |
| Contact finish - mating | Gold |
The BM50B-SRDS-G-TF(LF)(SN): The mated stack height is 6.3 mm, so budget that z-height in your enclosure or mezzanine design.
The BM50B-SRDS-G-TF (without the (LF)(SN) suffix) is electrically identical but may lack the RoHS compliance marking. For a RoHS-required BOM, the (LF)(SN) variant is the correct choice.
This is a male pin header that mates with a JST SHD series receptacle (female, crimp-type). The mating half is not listed in this entry, but the SHD series receptacles share the same 1.00 mm pitch and 50-position layout. Confirm the receptacle part number against your assembly drawing.