Skip to main content
Log in
S07B-PASK-2(LF)(SN) — JST product photo
JST

S07B-PASK-2(LF)(SN) JST PA Header — 7 Pos, 2mm, Right Angle

MPNS07B-PASK-2(LF)(SN)
Active

JST PA series, S07B-PASK-2(LF)(SN), Board to Cable/Wire header, 7 positions, 2.00 mm pitch, right-angle through-hole, shrouded 4-wall, locking ramp, tin-plated male pins, 3 A, 250 V, UL94 V-0, RoHS.

$0.5900Ref. price · indicative, final on quote
S07B-PASK-2(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S07B-PASK-2(LF)(SN) Technical Specifications
ParameterValue
SeriesPA
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.256\" (6.50mm)
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions7
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.126\" (3.20mm)

Product details

It mates with PA-series crimp receptacle housings to make a board-to-wire connection. The locking ramp on top engages the matching latch on the PA receptacle, giving a positive lock that resists vibration-induced disconnect.

Right-Angle Routing and Board Fit

The kinked solder tails (0.134" post length) provide good through-hole retention and a visual solder-fillet check on the bottom side. The insulation height of 0.256" (6.50 mm) and mating pin length of 0.126" (3.20 mm) set the clearance under the shroud — check against your receptacle's insertion depth.

The base product number is S07B-PAS, which covers the unplated or alternate-finish variants. The (LF)(SN) suffix specifies lead-free solder tails and tin plating.

Frequently asked questions

What is the mating connector for S07B-PASK-2(LF)(SN)?

It mates with a PA-series crimp receptacle housing (e.g., PAP-07V-S or similar) that accepts discrete crimp terminals.