It mates with PA-series crimp receptacle housings to make a board-to-wire connection. The locking ramp on top engages the matching latch on the PA receptacle, giving a positive lock that resists vibration-induced disconnect.
Right-Angle Routing and Board Fit
The kinked solder tails (0.134" post length) provide good through-hole retention and a visual solder-fillet check on the bottom side. The insulation height of 0.256" (6.50 mm) and mating pin length of 0.126" (3.20 mm) set the clearance under the shroud — check against your receptacle's insertion depth.
The base product number is S07B-PAS, which covers the unplated or alternate-finish variants. The (LF)(SN) suffix specifies lead-free solder tails and tin plating.