Skip to main content
Log in
S10B-PH-SM4-TB(LF)(SN) — JST product photo
JST

JST S10B-PH-SM4-TB(LF)(SN) PH Series 10-Pin Right-Angle SMT

MPNS10B-PH-SM4-TB(LF)(SN)
Active

JST PH series, 10-position, 2.00mm pitch, shrouded header, male pin, right-angle surface mount, tin-plated contacts, detent lock, UL94 V-0, -25°C to 85°C.

$1.2000Ref. price · indicative, final on quote
S10B-PH-SM4-TB(LF)(SN) datasheet
StockContact for availability
Lead time3-5 Days wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S10B-PH-SM4-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.217\" (5.51mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions10
Contact finish - postTin
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

2.00 mm Pitch, Right-Angle SMT — Board-Fit and Routing

The S10B-PH-SM4-TB(LF)(SN): The detent lock provides positive retention against casual vibration; it's not a secondary-lock system, but for indoor equipment the latch holds the mated pair without extra hardware. Tin is adequate for moderate mating-cycle duty (20–30 cycles) in a clean environment; if the application sees frequent reconnects or corrosive exposure, the gold-plated sibling in the PH series is the better choice.

RoHS compliance is indicated by the (LF)(SN) suffix — lead-free and tin-plated.

Mates with JST PH series crimp-style receptacle housings (e.g., PHR-10) using the SPH-002T-P0.5S or equivalent tin-plated crimp terminal.

Frequently asked questions

What is the pin pitch of S10B-PH-SM4-TB(LF)(SN)?

The mating pitch is 0.079 inches (2.00 mm). This is the centre-to-centre spacing between adjacent pins and drives the PCB footprint and the mating receptacle pitch.

What is the mating connector for S10B-PH-SM4-TB(LF)(SN)?

It mates with JST PH series crimp receptacle housings, such as the PHR-10 (10-position). The matching crimp terminal is the SPH-002T-P0.5S (tin-plated) or its gold-plated variant for higher cycle life.