JST Sales America Inc., EH series, Board to Cable/Wire Header, 12 positions, 2.50mm pitch, Through Hole Right Angle, Shrouded - 3 Wall, Latch Lock, Tin contacts, 3A, 250V, UL94 V-0, Active
| Parameter | Value |
|---|---|
| Series | EH |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Lock |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.165\" (4.20mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 3 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.157\" (4.00mm) |
The tin-on-tin contact interface is cost-effective for moderate cycle counts — expect several hundred mates before wear-through.
This is the same locking mechanism used across the EH series; the receptacle housing has the corresponding ramp.
The (LF)(SN) suffix confirms RoHS compliance and a lead-free tin finish.
This header mates with the JST EH series crimp receptacle housing, part number EHR-12 (12-position). The corresponding crimp terminal is the SEH-001T-P0.6 or SEH-002T-P0.6, depending on wire gauge.