Skip to main content
Log in
S12B-PH-SM4-TB(LF)(SN) — JST product photo
JST

JST S12B-PH-SM4-TB(LF)(SN) SMD Right-Angle Header, 12 Pos

MPNS12B-PH-SM4-TB(LF)(SN)
Active

JST PH series, Board to Cable/Wire, Header, Male Pin, 12 Positions, 2.00 mm Pitch, Surface Mount Right Angle, Tin Contacts, Detent Lock, UL94 V-0

$1.3100Ref. price · indicative, final on quote
S12B-PH-SM4-TB(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S12B-PH-SM4-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.217\" (5.51mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions12
Contact finish - postTin
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

Pitch, Orientation, and Footprint Fit

The S12B-PH-SM4-TB(LF)(SN): At 2.00 mm pitch, this header demands a corresponding PCB footprint with 0.079-inch pad spacing — a common density that balances routing ease with board space.

This header mates with JST PH series crimp-style receptacle housings using SPH-002T-P0.5S or equivalent contacts. The detent lock engages with the corresponding latch on the receptacle for a secure connection. Termination is solder-only — the SMD tails are designed for reflow soldering to the PCB pads; no press-fit or through-hole option exists for this order code.

Frequently asked questions

What is the mating connector for the S12B-PH-SM4-TB(LF)(SN)?

This header mates with JST PH series receptacle housings, such as the PHR-12 (12-position), using crimp terminals SPH-002T-P0.5S.