Skip to main content
Log in
S13B-PH-K-S(LF)(SN) — JST product photo
JST

JST S13B-PH-K-S(LF)(SN) PH Series Header – 13 Pos

MPNS13B-PH-K-S(LF)(SN)
Active

JST PH series, Board to Cable/Wire, Header, 13 Positions, 2.00 mm Pitch, Through Hole, Right Angle, Shrouded - 4 Wall, Detent Lock, Tin Contacts, 2 A, 100 V, UL94 V-0

$0.5700Ref. price · indicative, final on quote
S13B-PH-K-S(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S13B-PH-K-S(LF)(SN) Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.189\" (4.80mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions13
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

The S13B-PH-K-S(LF)(SN): The 0.189" (4.80 mm) insulation height gives clearance for the mating receptacle's latch. The press-fit, solder termination means the pins are mechanically retained in the plated through-holes before wave soldering — this prevents skew during reflow and improves coplanarity in high-vibration environments.

Comparing the 13-Position to the 14-Position Sibling

The closest peer in the PH series is the S14B-PH-K-S(LF)(SN) — identical in pitch (2.00 mm), current rating (2 A), voltage (100 V), orientation (right-angle), and shrouding. The non-LF(SN) variant S13B-PH-K-S shares the same mechanical dimensions and ratings — the (LF)(SN) suffix simply confirms RoHS compliance and tin plating. Either can be used where lead-free assembly is required.

Frequently asked questions

What is the mating connector for the S13B-PH-K-S(LF)(SN)?

This header mates with a JST PH-series crimp receptacle housing (sold separately) that accepts the matching crimp terminals.