Skip to main content
Log in
S13B-XH-A(LF)(SN) — JST product photo
JST

JST S13B-XH-A(LF)(SN) Header 13 Pos 2.5mm Right Angle

MPNS13B-XH-A(LF)(SN)
Active

JST XH series, Board to Cable/Wire header, 13 circuits, 1 row, 2.50mm pitch, right-angle through-hole, tin-plated male pins, shrouded with detent lock.

$0.7500Ref. price · indicative, final on quote
S13B-XH-A(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S13B-XH-A(LF)(SN) Technical Specifications
ParameterValue
SeriesXH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.240\" (6.10mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions13
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

The S13B-XH-A(LF)(SN): This is a 13-position, single-row header on 2.50 mm pitch — the most common JST XH footprint.

Current, Voltage, and Temperature Range

Tin-on-tin mating is cost-effective for moderate-cycle applications; expect several hundred mate-unmate cycles before contact resistance drifts.

Mating with XH Crimp Housings

The shrouded 4-wall design guides the mating XH receptacle housing into alignment. The detent lock provides audible feedback on full mate — no secondary lock needed for most static installations. The header accepts the standard JST XH crimp terminal (SXH-001T-P0.6 or equivalent).

Frequently asked questions

Where can I buy S13B-XH-A(LF)(SN) and what is the lead time?

No stock-holding claim; each request is quoted individually.

Is S13B-XH-A(LF)(SN) compatible with standard JST XH crimp housings?

Yes. The detent lock and 4-wall shroud ensure alignment.

What is the difference between S13B-XH-A(LF)(SN) and standard S13B-XH-A?

The (LF)(SN) suffix indicates RoHS compliance (lead-free) and tin-plated contacts. The standard S13B-XH-A may use a different contact finish; verify the specific plating grade on your BOM. Otherwise the mechanical footprint and ratings are identical.