Skip to main content
Log in
S2B-EH(LF)(SN) — JST product photo
JST

JST S2B-EH(LF)(SN) Header — 2.50mm Pitch, 2-Pos, Right-Angle

MPNS2B-EH(LF)(SN)
Active

JST EH series, Board to Cable/Wire, 2-position, 2.50mm pitch, 3A, 250V, right-angle through-hole, shrouded-3-wall, latch lock, tin-plated male pins, UL94 V-0 natural PA66 housing.

$0.1700Ref. price · indicative, final on quote
S2B-EH(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S2B-EH(LF)(SN) Technical Specifications
ParameterValue
SeriesEH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.165\" (4.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 3 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions2
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Contact finish - matingTin
Contact length - mating0.157\" (4.00mm)

Product details

What the 2.50mm Pitch and 3A Rating Mean for Your Layout

The S2B-EH(LF)(SN): The latch lock fastening type provides positive retention against moderate vibration — the mating receptacle clicks into place and stays until deliberately released.

This header mates with JST EH series crimp receptacles (e.g., EHR-2) using the matching tin-plated male pins — the latch lock engages with the receptacle housing for a vibration-resistant connection. Termination is press-fit, solder — the through-hole posts (0.126" / 3.20mm long) are soldered to the PCB; the press-fit feature provides initial retention during wave or hand soldering.

Frequently asked questions

Where can I buy JST S2B-EH(LF)(SN) and how is it quoted?

No stock-holding claim; submit a BOM quantity for a firm quote.

What is the pitch of S2B-EH(LF)(SN)?

0.098" (2.50mm) pitch — this is the centre-to-centre spacing between adjacent pins.

Is S2B-EH(LF)(SN) RoHS compliant?

Yes — the (LF)(SN) suffix indicates RoHS compliance and tin-plated contacts.

What crimp terminal works with this header?

JST EH series crimp terminals (male pin side is integral to the header; the mating receptacle uses female crimp terminals such as SEH-001T-P0.6). Confirm wire gauge with the terminal datasheet.