Skip to main content
Log in
S2B-ZR(LF)(SN) — JST product photo
JST

S2B-ZR(LF)(SN) JST ZH Header 2-Pos 1.5mm Right Angle

MPNS2B-ZR(LF)(SN)
Active

JST Sales America Inc. ZH series, 2-position, 1.50mm pitch, through-hole right-angle header, shrouded 4-wall, tin-plated contacts, 1A rated, UL94 V-0 housing.

$0.1900Ref. price · indicative, final on quote
S2B-ZR(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S2B-ZR(LF)(SN) Technical Specifications
ParameterValue
SeriesZH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating50V
Current rating1A
Operating temperature-25°C~85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.146\" (3.70mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeCircular
Rows1
Pitch0.059\" (1.50mm)
Positions2
Contact finish - postTin
Contact length - post0.106\" (2.69mm)
Contact finish - matingTin
Contact length - mating0.094\" (2.40mm)

Product details

Right-Angle Mounting Saves Enclosure Height

The S2B-ZR(LF)(SN): This is useful in shallow enclosures where a vertical header would hit the lid. The 0.106" (2.69 mm) solder tail length gives enough through-hole standoff for wave solder without bridging.

Detent Lock Holds the Mating Half

The detent lock on this header provides positive retention with the matching ZH receptacle — it clicks into place and resists un-mating from cable pull or moderate vibration. No secondary latch or TPA is needed for typical indoor equipment; the lock is designed for the ZH series' intended use in consumer electronics and small appliances.

Frequently asked questions

What is the mating connector for S2B-ZR(LF)(SN)?

This header mates with JST ZH series female receptacle housings that accept crimp terminals. The mating half uses the same 1.50 mm pitch and detent lock. Common mating part numbers include the ZHR-2 (2-position housing) and the corresponding crimp terminal SZH-002T-P0.5.