JST PH series, Board to Cable/Wire, Header, Male Pin, Solder, Surface Mount, Right Angle, 4 Positions, 0.079" (2.00mm) Pitch, 2 A, 100 V, Detent Lock, Shrouded - 4 Wall, Tin Mating Finish, UL94 V-0
| Parameter | Value |
|---|---|
| Series | PH |
| Gender | Male Pin |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.217\" (5.51mm) |
| Insulation material | Polyamide (PA6T), Nylon 6T |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
The S4B-PH-SM4-TB(LF)(SN): The 100 V rating covers low-voltage signal and power distribution.
Packaging is Tape & Reel (TR) for automated pick-and-place, with Cut Tape (CT) available for smaller runs. The tin-plated mating finish is suited for moderate-cycle applications (typically 30-50 mates) in clean, indoor environments.
The detent lock engages with the matching latch on the female housing.
The S4B-PH-SM4-TB (without the (LF)(SN) suffix) is a functionally identical variant — same 4 positions, same tin plating, same right-angle SMT package. The (LF)(SN) suffix indicates RoHS compliance; the base variant may not carry that marking.