2.00 mm Pitch, 5-Position, Right-Angle — the Board-Edge Fit
The S5B-PH-K-S(LF)(SN): The shrouded 4-wall design and detent lock provide positive alignment and retention with the mating PH series crimp receptacle — the lock clicks on full mate, and the shroud prevents bent pins during blind mating.
Right-Angle Routing and Board-Edge Clearance
The contact length after the mating face is 3.30 mm, and the post length below the board is 3.40 mm. With an insulation height of 4.80 mm above the board, the header stands low enough to fit under most ribbon cables or close-fitting covers.