Skip to main content
Log in
SM02(8.0)B-BHS-1-TB(LF)(SN) — JST product photo
JST

SM02(8.0)B-BHS-1-TB(LF)(SN) JST BH 2-Pos 8mm Pitch Header –

MPNSM02(8.0)B-BHS-1-TB(LF)(SN)
Active

JST BH series, SM02(8.0)B-BHS-1-TB(LF)(SN), 2-position male pin header, 8.00mm pitch, surface-mount right-angle, shrouded 4-wall, detent lock, 600V/1A, UL94 V-0, RoHS compliant.

$0.5600Ref. price · indicative, final on quote
SM02(8.0)B-BHS-1-TB(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SM02(8.0)B-BHS-1-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesBH
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating600V
Current rating1A
Operating temperature-25°C~85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.126\" (3.20mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.315\" (8.00mm)
Positions2
Contact finish - postTin
Contact finish - matingTin

Product details

Wide 8mm Pitch for High-Voltage Isolation

The SM02(8.0)B-BHS-1-TB(LF)(SN): At 8.00mm pitch, this 2-position header provides generous creepage and clearance between adjacent circuits—directly supporting the 600V voltage rating. The wide spacing also simplifies PCB routing: no need for tight trace neck-downs between pads. The 1A current rating per contact is modest, but the combination of 600V and 1A points to a power-sensing or high-voltage signal role rather than a high-current bus.

Right-Angle SMT and Board Retention

No official successor or pin-compatible alternative is listed by JST. For a direct cross-shop, look at other BH-series 2-position headers with the same 8.00mm pitch and SMT right-angle orientation—confirm the detent lock and shrouding match your assembly.

Frequently asked questions

Is SM02(8.0)B-BHS-1-TB(LF)(SN) RoHS compliant?

Yes—the (LF)(SN) suffix indicates lead-free and RoHS-compliant construction per JST's designation.

What mating connector works with SM02(8.0)B-BHS-1-TB(LF)(SN)?

This is a male pin header from JST's BH series. It mates with a BH-series female receptacle housing that accepts crimp terminals. The 8.00mm pitch and detent lock are specific to the BH series—confirm the receptacle part number with the same pitch and locking feature.