Skip to main content
Log in
SM09B-ZESS-TB(LF)(SN) — JST product photo
JST

SM09B-ZESS-TB(LF)(SN) JST ZE Series 9-Pin 1.5mm Header

MPNSM09B-ZESS-TB(LF)(SN)
Active

JST ZE series, SM09B-ZESS-TB(LF)(SN), 9-position single-row header, 1.50 mm pitch, surface-mount right-angle, tin-plated contacts, shrouded 4-wall, locking ramp, 2 A, 100 V, UL94 V-0, ROHS3 compliant.

$0.5364Ref. price · indicative, final on quote
SM09B-ZESS-TB(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SM09B-ZESS-TB(LF)(SN) Technical Specifications
ParameterValue
SeriesZE
GenderOuter Shroud Contact
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating100V
Current rating2A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.228\" (5.80mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeRectangular
Rows1
Pitch0.059\" (1.50mm)
Positions9
Contact finish - postTin
Contact finish - matingTin

Product details

What this 9-position header is for

The SM09B-ZESS-TB(LF)(SN) is a 9-circuit, single-row header from JST's ZE series — a board-to-cable/wire interconnect with a 1.50 mm pitch that sets the PCB footprint and the per-contact current ceiling at 2 A.

Board-fit: right-angle SMT with solder retention

Right-angle orientation routes the mated cable parallel to the board — a common choice for board-edge connectors in space-constrained enclosures where z-height is tight.

This header mates with a JST ZE series crimp receptacle housing (not included). Termination is solder — the SMT pads on the PCB must match the 1.50 mm pitch and the right-angle footprint.

Frequently asked questions

What is the mating connector for the SM09B-ZESS-TB(LF)(SN)?

The mating half is a JST ZE series crimp receptacle housing (order separately) with matching crimp terminals. The locking ramp on this header engages with the latch on the receptacle for a vibration-resistant connection.

Is the SM09B-ZESS-TB(LF)(SN) RoHS compliant?

Yes, it is ROHS3 compliant per JST's compliance status.

Does the SM09B-ZESS-TB(LF)(SN) have solder retention?

Yes, the header includes solder retention features that hold it in place during SMT reflow, preventing movement or tombstoning.