JST NSH series, 10-position, 1.00mm pitch, shrouded 4-wall header, surface mount right angle, latch holder, 1A, 50V, UL94 V-0, tin-plated contacts, natural insulation.
| Parameter | Value |
|---|---|
| Series | NSH |
| Gender | Male Pin |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.173\" (4.40mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The SM10B-NSHSS-TB (LF)(SN): Termination is by solder — no press-fit tooling required, which simplifies assembly for low-to-medium volume builds.
The 1 A current rating per contact is consistent with the signal-level duty of fine-pitch connectors — not for power distribution.
The base product number SM10B-NS is the ordering root for the series.
This is a male pin header from the JST NSH series. It mates with a female receptacle housing from the same NSH series, using crimp terminals.
The part number suffix (LF)(SN) indicates lead-free (LF) and tin-plated (SN) construction, consistent with RoHS compliance.
The NSH series is a specific 1.00 mm pitch family; any replacement would require a different pitch or footprint, which means a board layout change.