JST Sales America Inc., ZE series, Board to Cable/Wire, Header, 12 positions, 1.50mm pitch, 2A, 100V, Surface Mount Right Angle, Shrouded 4-wall, Locking Ramp, Tin contacts, UL94 V-0, Natural, Tape & Reel
| Parameter | Value |
|---|---|
| Series | ZE |
| Gender | Outer Shroud Contact |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.228\" (5.80mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
A locking ramp provides audible positive retention — the connector stays mated under moderate vibration without a secondary latch. Solder retention pads anchor the header during reflow, preventing shift or tombstoning.
The tin-plated mating finish suits applications with limited mating cycles. The 100 V voltage rating covers typical low-voltage equipment.
Yes, RoHS compliant per.
The mating half is a ZE series crimp receptacle housing (sold separately). The header mates with the corresponding female connector using the same 1.50 mm pitch and locking ramp interface.