JST SHL series, 14-position, 1.00 mm pitch, surface-mount right-angle header, shrouded 4-wall, push-pull latch, tin-plated contacts, UL94 V-0, active production.
| Parameter | Value |
|---|---|
| Series | SHL |
| Gender | Outer Shroud Contact |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Phosphor Bronze |
| Insulation color | Natural |
| Insulation height | 0.069\" (1.75mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 14 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The SM14B-SHLS-TF(LF)(SN): The 1.00 mm pitch and tin-plated contacts limit the current per circuit well below what a 2.54 mm header would carry.
Push-pull fastening means no tool is needed to mate or unmate, but the latch is light-duty — in a high-vibration environment, a secondary retention method (like a wire tie or a locking receptacle) would be wise.
Ideal for board-edge cable exits.
Single row, 14 positions, 1.00 mm pitch. The board footprint is a straight line of SMT pads at 1.00 mm spacing.