JST SHD series, Board to Cable/Wire, 20-position, 1.00mm pitch, right-angle SMT header, shrouded-4 wall, gold-plated male pins, 1A/50V, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | SHD |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Phosphor Bronze |
| Insulation color | Natural |
| Insulation height | 0.217\" (5.51mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 20 |
| Contact finish - mating | Gold |
The solder retention tabs anchor the part during reflow, resisting the shear force from cable strain after assembly. For a contract manufacturer, that means the part feeds the line from a standard reel and holds position through the oven without secondary hand-soldering.
The mating half uses the same 1.00mm pitch and 20-position layout. Confirm the receptacle part number against your cable assembly requirements.