Skip to main content
Log in
XHP-2(10.0)-U — JST product photo
JST

JST XHP-2(10.0)-U Receptacle Housing, 2 Pos, 10.00 mm Pitch

MPNXHP-2(10.0)-U
Active

JST XH series receptacle housing, XHP-2(10.0)-U, 2 positions, 1 row, 0.394" (10.00 mm) pitch, free hanging (in-line) mount, crimp termination, natural, bulk pack.

$0.1200Ref. price · indicative, final on quote
XHP-2(10.0)-U datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

XHP-2(10.0)-U Technical Specifications
ParameterValue
SeriesXH
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Operating temperature-25°C~85°C
ColorNatural
NoteContacts Not Included
Pitch0.394\" (10.00mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions2

Product details

The JST XHP-2(10.0)-U is a 2-position receptacle housing from the XH series, but don't let the series name fool you — this is the wide-pitch variant at 0.394" (10.00 mm) between centers, not the standard 2.50 mm XH pitch you see on the common XHP-2. That 10.00 mm spacing is the whole story here: it gives you room for larger wire, higher voltage creepage, or just a connector that doesn't disappear into a dense harness. It's a free-hanging, single-row, female socket housing meant for crimp-terminated contacts — you supply those separately.

Wiring It Up — Contacts and Crimp

The 10.00 mm pitch accommodates larger wire gauges.

Sourcing This Part

This is a current-production part. No official second-source or cross-reference is recorded.

Frequently asked questions

Does the XHP-2(10.0)-U include contacts?

No, the XHP-2(10.0)-U is a housing only — contacts are not included. You must order the female crimp terminals separately, typically the JST SXH-001T-P0.6 or equivalent for the wire gauge you're using.

What is the difference between XHP-2(10.0)-U and the standard XHP-2?

The critical difference is pitch: the XHP-2(10.0)-U uses a 0.394" (10.00 mm) pitch, while the standard XHP-2 uses 0.098" (2.50 mm). Both are 2-position, single-row, free-hanging receptacle housings from the same XH series, but the 10.00 mm variant is for applications needing wider spacing — larger wire, higher voltage, or easier hand assembly.